Assetto Rally Car
Lancia Fulvia Coupe HF
Main view prioritized for parallel surface comparison in Group 4: Gravel, Asphalt Dry and Asphalt Wet.
Surface comparison
Each parameter is shown side-by-side across the three Assetto Rally surface states. Published values stay live, and missing wet data is clearly marked without hiding the route.
GravelAsphalt DryAsphalt Wet
Surface rollout
Asphalt Wet is already visible in the UI and ready for future manual CSV imports, even when published setup rows are not loaded yet.
Transmission / General
| Parameter | Gravel | Asphalt Dry | Asphalt Wet |
|---|---|---|---|
| Final drive / differential ratio | 2 | 2 | Coming soon |
Ride height & springs
| Parameter | Gravel | Asphalt Dry | Asphalt Wet |
|---|---|---|---|
| Front ride height | 0.0690 m | 0.0580 m | Coming soon |
| Rear ride height | 0.0620 m | 0.0550 m | Coming soon |
Front differential
| Parameter | Gravel | Asphalt Dry | Asphalt Wet |
|---|---|---|---|
| LSD power / coast ramp | 75/85 | 85/85 | Coming soon |
| LSD preload | 40.0 Nm | 40.0 Nm | Coming soon |
| LSD plates | 4 | 4 | Coming soon |
Rear differential
| Parameter | Gravel | Asphalt Dry | Asphalt Wet |
|---|---|---|---|
| Differential ratio | 39/11 | 43/10 | Coming soon |
Tyres & alignment
| Parameter | Gravel | Asphalt Dry | Asphalt Wet |
|---|---|---|---|
| Front tyre pressure | 29.5 psi | 32.0 psi | Coming soon |
| Rear tyre pressure | 30.0 psi | 32.5 psi | Coming soon |
| Front toe | 0.0000 m | -0.0005 m | Coming soon |
Brake hardware
| Parameter | Gravel | Asphalt Dry | Asphalt Wet |
|---|---|---|---|
| Front brake pads/shoes | Medium | Medium | Coming soon |
| Rear brake pads/shoes | Medium | Medium | Coming soon |
Balance & hydraulics / General
| Parameter | Gravel | Asphalt Dry | Asphalt Wet |
|---|---|---|---|
| Front brake bias | 0.2600 | 0.3000 | Coming soon |
| Proportional preload | 1.00 MPa | 1.00 MPa | Coming soon |
| Handbrake force | 0.80 | 0.70 | Coming soon |